Servers will be able to boot up from a hard disk miles away, potentially improving server reliability and disaster recovery, using technology to be introduced Tuesday by Cisco Systems Inc.
The Network Boot firmware, to be unveiled at the Storage Networking World conference in Orlando, Florida, is a new feature for the Cisco SN 5400 Storage Router series. Downloaded to a diskless server, it will allow that server to start up from a disk on an external storage device via iSCSI (Internet Small Computer System Interface), according to Doug Ingraham, a senior marketing manager at Cisco, in San Jose, California. Network Boot uses the Intel Corp. PXE (Preboot eXecution Environment) for remote booting and system start up.
Servers without their own hard disks could be more reliable than conventional servers, as well as consume less power and create less heat, because they would have no moving parts, Ingraham said. The remote boot technology also could allow a large number of servers, such as blade servers in many rack-mounted chassis, to boot up from a single storage system, according to Cisco.
The software also could lead to better disaster recovery systems, Ingraham said. In case of a disaster that incapacitates a server but not its linked storage device, a backup server could be instructed to boot from the same remote storage. In addition, a backup storage system could be set up and a server reconfigured to start up from that backup disk in case of disaster. Cisco is working with storage system makers to eventually automate those transitions in case of a disaster.
Remote booting for diskless servers is possible today over Fibre Channel networks, Ingraham said. The emerging iSCSI standard leverages widely used IP (Internet Protocol) network technology in storage networks.
Over iSCSI, the server and storage could be any distance apart, although a link of thousands of miles might make the server start up very slow.
"Theoretically, it can go any distance. ... There's no technical limit, but there's a practical one for how long you want the boot-up to take," Ingraham said.
Network Boot will be available immediately in the latest firmware upgrade to the Cisco SN 5420 and 5428 storage routers and MDS 9000 series storage switches. Customers with older versions of the firmware can download the new version free from Cisco's Web site at http://www.cisco.com/public/sw-center/sw-stornet.shtml.
Storage Networking World will continue through Wednesday. More information is available at http://www.storagenetworkingworld.com.