The IEEE last week approved a standard for 10 Gigabit Ethernet over copper, opening the way for short-reach, high-speed data center links that are move affordable to enterprises.
The 802.3ak standard will be implemented as 10GBASE-CX4, providing 10G bit/sec over dual twinaxial cables, similar to the cabling used in Infiniband networking. This is the first copper Ethernet standard not to use category 5/6 cabling technology.
"The new standard provides an economical way for Ethernet switches and server clusters located within 15 meters of each other in equipment rooms and data centers to be interconnected at 10G bit/sec," said the IEEE in a statement
Observers say that 10GBASE-CX4 ports will be more affordable to enterprises than current fiber-based 10G ports, which average around $10,000 per port, according to the Dell’Oro Group Inc.
"We expect installation costs for copper 10GBASE-CX4 interconnections to be one-tenth that of comparable 10GBASE-optical solutions," said Dan Dove, Chair of the 802.3ak Task Force and Principal Engineer, Hewlett-Packard Co. ProCurve Networking Business, in a statement.
The top three 10 Gigabit Ethernet companies in the fourth quarter of 2003, in terms of shipments, were Cisco Systems Inc., Foundry Networks Inc. and Extreme Networks Inc., according to Dell’Oro. All three vendors saw at least double-digit growth for their products in the fourth quarter of 2003.
The 10 Gigabit Ethernet was originally designed as a long-haul carrier technology, specifically for replacing SONET OC192 in metro area networks with Ethernet. However, as enterprises began showing interests in 10G, and carriers cut back spending during the telecom bust, interest began to grow in a short-haul version of 10 Gigabit for switch-to-switch interconnects.
"The availability of 10GBASE-CX4 copper-based interface should accelerate the deployment of 10 Gigabit Ethernet," said Bob Grow, Chair of the 802.3 Working Group and a Principal Architect at Intel Corp., in a statement.