Review: WatchGuard XTM2050
- 22 May, 2012 16:09
What is big, flexible, red and costs more than your average mid-range family sedan? Not a HSV—not quite that much—but this top of the range unified threat management (UTM) device (or in this case, XTM– the X presumably being a variable) is definitely in a high performance category. The XTM2050 from WatchGuard is one of a new breed of security devices that packs punch.
The XTM2050 device that was presented to Enex TestLab for testing came packed with 16 copper Ethernet interfaces 10/100/1000 (two modules of eight) and two fibre 10Gbps interfaces for a combined 20Gbps throughput. WatchGuard claims 10Gbps aggregated throughput with all security services enabled. As a one-stop core network security shop, an enterprise would be hard pressed to pass this by.
Once you reach this level of capability, technology isn’t cheap. But what is intimidating is the thought that you’re probably up for three or four of them. Your disaster recovery (DR) team would almost certainly demand a redundant hot spare to be available should anything go wrong with the primary unit. They’d probably be also pushing for a separate hot, or at least warm, DR site in a separate geographic location. So without too much architecture and planning, this mid-range family sedan could reasonably be more of a mini-fleet. Purchasing a fleet of big, red, flexible XTM2050s will be a sizeable investment.
Countering this is the XTM2050’s claimed mean time between failure (MTBF) of 90,408 hours, which is equivalent to 10.3 years running 24x7x365 (give or take the odd leap year). This includes fans and power supply. Theoretically, the life of this device will surpass the lease on the device, and you’d expect that advancements in network technology would ultimately make the device redundant before it fails.
So while an enterprise of the scale we’re talking here requires at least three, or more, XTM2050s to provide security for the core network infrastructure, cost should not be the primary focus.
Functionality and performance, leading to productivity is what is most important. At the end of the day, if an organisation is running 10Gbps, or multiples of this, they should be installing the best core technology, and they should be able to afford it.
This raises an often touted point these days in network, and (dare we mention it) the Cloud—where exactly is that neat perimeter segmenting a network from the evil other side? At this juncture we will also mention that the device carries the IPv6 ready logo.
The XTM2050 is obviously not designed as a gatekeeper between two sides, it has evolved to be a platform which can be configured in any number of ways, seamlessly working within and beyond an organisation’s secure network infrastructure.
With this device comes an acronym, “NGFW”—next-generation firewall. We think it’s a little strange for such a functional device to be called a firewall, next-generation or not, but we’ll leave that to the marketing boffins.
This is one of the first devices we’ve seen that claims suitability for managed security providers. It means security vendors such as WatchGuard can offer products to solution providers who sell security as a service—enabling businesses to outsource some of their security to external parties.
Physically, the device is beautifully laid out. It’s extremely well designed with plenty of ventilation. It has six rear-mounted fans, of which four are actually doubles. The two hard drives installed in our test unit were 500GB 7200RPM SATA 3Gb/s units. The front panel houses all of the interfaces as well as the status LEDs and a small LCD display.
Configuration, administration and management is via WatchGuard’s standard, easy-to-use, application interface.
Although we see this product best suiting large organisations, a mid-sized enterprise could benefit from a single XTM2050 configured correctly, supported by appropriate SLAs for repair/replacement. There is actually an impressive degree of integrated redundancy built into the unit. Realistically, if it’s setup correctly, you can manage for prospective points of failure, except the actual back-plane.
The XTM2050 has dual removable hard drives (readily accessed from the front), and there are dual removable power supplies (accessed from the rear), with three modular bays at the front to allow for combinations of network ports (and so redundancy should you require it).
The bottom line—a XTM2050 with NGFW bundle carries a MSRP of $54,995. The NGFW bundle includes application control, intrusion prevention, support and warranty for the first year.
The XTM2050 is undoubtedly worthy of evaluation, especially if you’re seeking long-term future proofing of your network security.
If your requirements are for high performance and exacting security services, a number of impressive options will provide really detailed insight into your network and activity.
- Great flexibility and functionality.
- Performance, performance, performance—amazing.
- Great levels of internal redundancy.
- Consistency across the fleet, if you’re familiar with WatchGuard’s interfaces, the XTM2050 will be easy.
- It’s red! Easily located.
- No locks on the removable hard drive bays — not a big concern, but this could be a last line of physical security.
- It’s pricy once you start calculating the costs of provisioning spare devices, but then again, it’s the price of solid security and great performance.
- It’s red, such a showy colour.
For vendor product information visit: http://www.watchguard.com/docs/datasheet/wg_ngfw_ds.pdf
Join the Computerworld Australia group on Linkedin. The group is open to IT Directors, IT Managers, Infrastructure Managers, Network Managers, Security Managers, Communications Managers.
Turnbull asks how the NBN got that way
Vodafone launches smartphone app for encrypted calls
Thanks a million, Drupal
Optus goes over the top with VoIP service
Turnbull asks how the NBN got that way